Say goodbye to first layer adhesion problems with Magigoo, the go-to solution for ensuring your 3D prints stick securely to the build plate. It’s simple to use—just apply it to the heated surface, and it ensures a solid bond throughout the print. But here’s the best part: once the plate cools, your print pops off effortlessly, no scraping or prying needed! Plus, Magigoo helps prevent the frustrating issue of warping, making sure even long prints come out perfectly.
Magigoo 3D printing adhesive
Whether you’re a hobbyist or a professional, there’s nothing more satisfying than seeing a multi-hour print finish without warping and being able to remove it with just a flick of the finger.
Key Benefits:
Works with multiple filaments: ABS, PLA, PETG, HIPS, ASA, TPU
Easy to apply: just shake, press, and spread on the active printing area – no need to coat the entire plate
Hassle-free removal: prints release smoothly when the plate cools down
Easy to clean: simply rinse off with water
Long-lasting: over 100 uses per bottle
Odorless and safe to use, even in classrooms or workshops
No tools needed for the application or removal
Magigoo is portable, non-toxic, and ensures your prints come out looking sharp every time.
Available in: 50ml and 120ml.
Important note: The applicator has an active spring valve, which activates when the applicator is pressed against the build plate. Please do not press the bottle as a “ketchup bottle”, otherwise the applicator may pop off. The bottle may be slightly squeezed, only when the nib is pressed against the bed and it may be necessary only if a bigger flow is required. The bottle must not be squeezed when the cap is off any other time as it may result in glue popping out of the bottle.
HR
IT
SL
DE
HU
