My Cart (0)
3D printing
How to print with PETG Hyper Speed filament like a pro
Table of Contents
Get the Most Out of Your PETG Hyper Speed Prints
AzureFilm’s PETG Hyper Speed filament is designed for makers who want more—more speed, more strength, and more reliability. Though it’s based on our classic PETG formula, we’ve tested it up to an impressive 1000 mm/s on the FLSUN T1 Pro, making it a top choice for high-speed 3D printing without sacrificing quality. Want to experience the same results? Here’s how to set yourself up for success.
Dry it right
PETG is hygroscopic, which means it absorbs moisture from the air, even while sealed. For the best results, dry the filament at 60°C-65°C for 8h before printing.
Handle with care
Prevent your spool from unwinding or tangling. Proper storage and handling can save you from failed prints and unnecessary frustration.
Use our ready-made Print Profiles
We’ve created optimised slicer profiles for several popular 3D printers—available directly on our website. Installing them is quick and easy, and they’ll help you unlock the true speed potential of the filament. At that point, your printer’s motion system becomes the only limiting factor.
Max out infill speed
Set your sparse infill speed to the maximum, and then fine-tune the inner and outer wall speeds. It’s all about finding the sweet spot between print speed and surface quality.
Layer height hack
Smaller layer heights often produce faster prints than you’d expect. Lowering layer height without increasing print time means more detail at no cost to speed.
Test with OrcaSlicer
To truly test your setup, open OrcaSlicer and run the Maximum Flow Test from the calibration tab. This is a great way to identify how fast your 3D printer can go with AzureFilm PETG Hyper Speed.
Why PETG Hyper Speed is the Maker’s choice
- Reaches print speeds up to 1000 mm/s
- Handles heat up to 80°C
- UV and water resistant – ideal for outdoor prints
- Slightly flexible, making it more impact-resistant than PLA
- Low shrinkage (0.3–0.6%)
- Compatible with open printers – no enclosure needed
This combination of speed, durability, and ease of use is why PETG Hyper Speed has quickly become a customer favourite!
We hope this blog helps you take full advantage of what PETG Hyper Speed has to offer. Whether you’re chasing higher speeds, more reliable prints, or tougher results, this filament is ready to deliver.
Happy printing!
Share
Previous postKeep reading
Top 12 Easter STL files
Easter is just around the corner, and we’ve rounded up 12 creative STL files for 3D printing that will make your celebrations even more special. Whether you’re looking to decorate your home, create unique gifts, or add a personal touch to your Easter festivities, these designs have got you covered. Bonus: To make your 3D [...]
How to 3D print: Essential tips, techniques, and must-know settings
When you first get started with 3D printing, it can be a bit overwhelming. There’s a lot to learn, from the basics to advanced print optimization. That’s why we’ve put together the blog below to walk you through some tips, techniques, and must-know settings. Before you start: If you’re completely new to 3D printing and [...]
Creality K2 Plus Combo: 3D-printed upgrades
The Creality K2 Plus Combo is a powerful machine, but like any 3D printer, there’s always room for improvement! Luckily, with a few clever 3D-printed upgrades, you can enhance your K2 Plus experience, improving usability, organization, and even print quality. We’ve gathered some of the best free STL files you can print at home to [...]
