How to print with PETG Hyper Speed filament like a pro

Table of Contents

    Useful links

    About us

    Contact us

    Get the Most Out of Your PETG Hyper Speed Prints

    AzureFilm’s PETG Hyper Speed filament is designed for makers who want more—more speed, more strength, and more reliability. Though it’s based on our classic PETG formula, we’ve tested it up to an impressive 1000 mm/s on the FLSUN T1 Pro, making it a top choice for high-speed 3D printing without sacrificing quality. Want to experience the same results? Here’s how to set yourself up for success.

    Dry it right

    PETG is hygroscopic, which means it absorbs moisture from the air, even while sealed. For the best results, dry the filament at 60°C-65°C for 8h before printing.

    Handle with care

    Prevent your spool from unwinding or tangling. Proper storage and handling can save you from failed prints and unnecessary frustration.

    Handle with care

    Use our ready-made Print Profiles

    We’ve created optimised slicer profiles for several popular 3D printers—available directly on our website. Installing them is quick and easy, and they’ll help you unlock the true speed potential of the filament. At that point, your printer’s motion system becomes the only limiting factor.

    Max out infill speed

    Set your sparse infill speed to the maximum, and then fine-tune the inner and outer wall speeds. It’s all about finding the sweet spot between print speed and surface quality.

    Max vol.speed

    Layer height hack

    Smaller layer heights often produce faster prints than you’d expect. Lowering layer height without increasing print time means more detail at no cost to speed.

    Test with OrcaSlicer

    To truly test your setup, open OrcaSlicer and run the Maximum Flow Test from the calibration tab. This is a great way to identify how fast your 3D printer can go with AzureFilm PETG Hyper Speed.

    PAN4540

    Why PETG Hyper Speed is the Maker’s choice

    • Reaches print speeds up to 1000 mm/s
    • Handles heat up to 80°C
    • UV and water resistant – ideal for outdoor prints
    • Slightly flexible, making it more impact-resistant than PLA
    • Low shrinkage (0.3–0.6%)
    • Compatible with open printers – no enclosure needed

    This combination of speed, durability, and ease of use is why PETG Hyper Speed has quickly become a customer favourite!

    We hope this blog helps you take full advantage of what PETG Hyper Speed has to offer. Whether you’re chasing higher speeds, more reliable prints, or tougher results, this filament is ready to deliver.

    Happy printing!

    Share

    Keep reading

    The evolution of AzureFilm filament Spools

    At AzureFilm, sustainability is more than a goal—it’s a guiding principle. Over the past decade, we’ve learned a lot about how 3D printing can create less waste without complicating the process. One of the biggest changes has been in our filament spools – from simple plastic designs to the durable, reusable Master Spool. In this [...]

    Read more

    Bambu Lab H2D Combo review: The perfect match for Hyper Speed printing

    Meet the Bambu Lab H2D Combo: High-Speed printing, refined If you’re chasing performance without compromise, the Bambu Lab H2D Combo is a printer you need to know about. Compact, precise, and incredibly fast, this dual extrusion system is built for makers who value both speed and quality. Pair it with our PETG Hyper Speed filament, [...]

    Read more

    PETG Hyper Speed: Unlocking new performance levels in 3D printing

    At AzureFilm, we believe innovation often starts with curiosity. Our PETG Original filament has long been a reliable choice for makers seeking strength, durability, and consistent print quality. But recently, we asked ourselves: how fast can it really go? To find out, we conducted extensive testing—adjusting printer settings, tweaking slicer parameters, and pushing print speeds [...]

    Read more