AzureFilm

Flexible filament 85A Blue

AzureFilm

Flexible filament 85A Blue

Mimic the beautiful sea tones and start printing with our refreshing Flexible filament 85A Blue.

Choose variation

14,90 EUR
(49,67 EUR / kg)
26,90 EUR
(41,38 EUR / kg)
In stock
In stock
You can access the Technical Data Sheet here.
Manufacturer Part No: FT853-5015; Net weight: 300g Manufacturer Part No: FT856-5015; Net weight: 650g
All prices have the tax included.
Extremely Flexible
Abrasion and chemical resistant
Shock and impact resistant
Not for beginners
Must be printed at low speed
Prone to stringing and clogging

Flexible 85A

Flexible 85A filaments are made from TPU and have rubber-like qualities. This means, that the material is extremely flexible but also very durable. Flexible filaments are commonly used to produce household appliances, toys, phone cases, wristbands, automotive parts, and medical supplies. If you need something that is supposed to bend, stretch, or compress, this filament should be up for the task.

There are different types of hardness for Flexible filaments labelled with numbers from 0 to 100 and letters from A to D. The material becomes stiffer and harder as the number or letter increases. 85A shore means that the filament is quite hard and can be compared to the hardness of a shoe heel. 

With a direct drive extruder, you can print both types of Flexible filaments. However, if your 3D printer has a Bowden tube, you’ll need to perform specific fine-tuning. Bowden tube printers tend to experience jams while printing Flexible filaments. If you have a Bowden tube, we recommend using 98A shore Flexible filament (slightly harder than 85A shore) for easier printing.

Disclaimer: If you hear the filament crack while 3D printing, it means the filament is damp and should be dried for better results. Use a filament dryer like Creality Dry Box.

 

 width=

Flexible filament 85A Blue

Mimic the beautiful sea tones and start printing with our refreshing Flexible filament 85A Blue.

To know more about Flexible filaments, read our blog

You can access the Technical Data Sheet here.

Printing recommendations:

  • For the best results, print at 220–240°C. 
  • Recommended printing table temperature is 80°C.
  • Print at a slow speed of 10–30mm/s.
  • Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Features and properties

Flexibility: Very High
Strength: Medium
Durability: Very High
Difficulty to use: Medium
Shrinkage / Warping: Minimal
Soluble: No
Diameter available: 1.75mm
Manufacturer: AzureFilm

Customer reviews

Others also bought

In stock
From 9,90 EUR
This product has multiple variants. The options may be chosen on the product page
In stock
From 9,90 EUR
This product has multiple variants. The options may be chosen on the product page
In stock
From 9,90 EUR
This product has multiple variants. The options may be chosen on the product page
In stock
From 9,90 EUR
This product has multiple variants. The options may be chosen on the product page