Mini Grinder for 3D Model

Mini Grinder for 3D Models with 6 Adapters

The mini grinder is an excellent tool for processing the 3D model or other similar models. With 3D printed figures, you can easily remove all support elements. We recommend using this tool to anyone who is passionate about 3D printing, model making, and home improvement.

SAFETY MEASURES:

1. Always remove the tool when changing the adapter.
2. Do not press the motor drive shaft lock button while the tool is running.
3. Do not use the accessory near water or immerse it in water.
4. Do not touch the drill or the spindle as this can be dangerous due to the high temperature.
5. The use of protective glasses and a mask is recommended.
6. Always switch off the device after use.
7. The product must be kept out of the reach of children.

FUNCTIONALITY:

• This product is used for grinding, polishing and sharpening the model.
• Simple application.
• Works with USB connection.
• An on / off switch is available. When the switch is in the “ON” position, the tool will operate at 3,000 RPM.Press the switch and find the required RPM from 3000 to 20,000 RPM / minimum.
• Slide the switch to the “OFF” position to stop completely.

MAINTENANCE INSTRUCTIONS:

• Clean the chassis with a soft cloth.
• Do not use detergents
• Do not use water to clean this product.

TECHNICAL SPECIFICATIONS:

• Tension:
  – Single-phase tension,
  – 50-60Hz
• Engine speed:
  – Höchstgeschwindigkeit: 20.000 Revolutions per minute
  – Einstellbare Geschwindigkeit: 3000 – 20.000 Revolutions per minute
• Size:
  – Size of the tool extension: 2.3mm
  – Size: 140mm x 30mm