Makers cought making cool stuff with Azurefilm
Refill PLA Matte HS – fast printing with a premium matte finish
High-speed printing up to 500mm/s
Consistent matte surface finish
Easy to print & beginner friendly
Fits our Master Spool & Bambu Reusable Spool
PLA Matte HS is best for…
Decorative prints & home decor
Vases, ornaments, interior details and displays with a soft matte look
Architectural models
Buildings, concepts, scale models and displays with a clean finish
Prototypes & display models
Samples, design concepts and prototypes with a professional surface
Figures, statues & displays
Busts, characters, sculptures and art prints with less visible layers
01 GET TO KNOW
Refill PLA Matte HS
Refill PLA Matte HS combines easy PLA printing with a smooth matte surface finish, high-speed performance up to 500 mm/s and less plastic waste. Its refill format helps reduce disposable spool waste while keeping the same clean matte look and reliable printing results.
The matte finish helps hide visible layer lines and gives prints a professional appearance, making it ideal for decorations, architectural models, prototypes, figures and display pieces.
02 HELPFUL REMINDERS
Tips & tricks
1. Matte finish hides layer lines
Use it when low-gloss surfaces and soft-looking layers matter.
2. Dry thoroughly before printing
Dry at 45 °C for 4 h and store sealed.
3. Avoid heated chambers
Avoid extra chamber heat if heat creep appears.
4. Keep visible walls moderate
Very high outer-wall speed can reduce surface quality even when infill can run fast.
5. Use practical first-layer speed
Start first layers around 60 mm/s, then increase speed.
6. Recommended print speed
Use ≤ 270 mm/s for normal prints; Max Printing Speed is the tested ceiling.
03 HOW TO PRINT
Recommendations
MAX
PRINTING SPEED
≤ 950 mm/s
NOZZLE
TEMPERATURE
220 °C
BED
TEMPERATURE
50 °C
CHAMBER
TEMPERATURE
35 °C
HEAT DEFLECTION TEMPERATURE
55 °C
RETRACTION
LENGTH
0.8 mm
04 MATERIAL DATA
Technical Specifications
Filament
|
MAX FLOW RATE |
70 mm³/s |
|
DRYING TEMPERATURE |
45 °C |
|
DRYING TIME |
4 h |
|
VICAT SOFTENING TEMPERATURE |
62 °C |
|
ENCLOSED PRINTER |
Not recommended |
Over 10.000.000 filaments produced and sold
Compatible with
REFILLS. Simple. Compatible. Sustainable.
All our filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.
AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.
Start printing in just 3 simple steps:
1. Unbox:
Unbox a set of two highly durable and reusable discs.
2. Install:
Align the discs with the rectangular hole and press down on both sides.
3. Enjoy:
Remove the secure tape and start printing.
Any last questions?
Here are some of the most common questions related to PLA Matte HS material. If you need help with anything else, feel free to contact us! We are real people, and we are happy to help.
Money Back Guarantee.
You have nothing to worry about. If you aren’t satisfied with your products, we offer a 30-day risk-free guarantee. You can get a full refund.
Makers also bought
