Makers cought making cool stuff with Azurefilm
Refill PLA – easy, reliable and made for everyday printing
Easy to print & ideal for beginners
Fits our Master Spool & Bambu Reusable Spool
Extracted from organic sources
Reliable, accurate and consistent results
PLA is best for…
Decorative prints & models
Figures, statues, display pieces, vases, home decor & creative models
Prototypes
Product samples, visual prototypes, design tests and display models
Educational & hobby projects
School projects, beginner prints, DIY models, toys and learning aids
Everyday practical prints
Organizers, holders, boxes, labels and useful gadgets for indoor use
01 GET TO KNOW
Refill PLA
Refill PLA is an easy-to-print filament made for reliable everyday 3D printing, supplied without a disposable spool. Its refill format helps reduce plastic waste while keeping the same dependable PLA performance.
It delivers smooth surfaces, clean details and consistent results. Available in 85+ colors, it is a great choice for beginners, hobby projects, decorations, prototypes and creative prints.
02 HELPFUL REMINDERS
Tips & tricks
1. Dry thoroughly before printing
Dry at 45 °C for 4 h, then store sealed or print from dry storage.
2. Keep PLA out of hot chambers
Use an open printer or avoid extra chamber heat; heated chambers can cause heat creep.
3. Clean build surface before fast prints
Finger oils can lift corners once speeds rise; clean PEI/glass before important parts.
4. Use practical first-layer speed
Start first layers around 60 mm/s, then increase speed after adhesion is stable.
5. Use normal room ventilation
Ventilate long prints and print rooms even with low-odor PLA.
6. Recommended print speed
Use ≤ 300 mm/s for normal prints; Max Printing Speed is the tested ceiling.
03 HOW TO PRINT
Recommendations
MAX
PRINTING SPEED
≤ 890 mm/s
NOZZLE
TEMPERATURE
220 °C
BED
TEMPERATURE
50 °C
CHAMBER
TEMPERATURE
35 °C
HEAT DEFLECTION TEMPERATURE
55 °C
RETRACTION
LENGTH
0.8 mm
04 MATERIAL DATA
Technical Specifications
Filament
|
MAX FLOW RATE |
66 mm³/s |
|
DRYING TEMPERATURE |
45 °C |
|
DRYING TIME |
4 h |
|
VICAT SOFTENING TEMPERATURE |
60 °C |
|
ENCLOSED PRINTER |
Not recommended |
Over 10.000.000 filaments produced and sold
Compatible with
REFILLS. Simple. Compatible. Sustainable.
All our filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.
AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.
Start printing in just 3 simple steps:
1. Unbox:
Unbox a set of two highly durable and reusable discs.
2. Install:
Align the discs with the rectangular hole and press down on both sides.
3. Enjoy:
Remove the secure tape and start printing.
Any last questions?
Here are some of the most common questions related to PLA material. If you need help with anything else, feel free to contact us! We are real people, and we are happy to help.
Money Back Guarantee.
You have nothing to worry about. If you aren’t satisfied with your products, we offer a 30-day risk-free guarantee. You can get a full refund.
Makers also bought
