Refill PLA
Refill PLA filaments have the exact same properties as our PLA Original. These filaments are an eco-friendly choice that offers reliable performance and consistent results. Furthermore, our Refill PLA filaments are easy to print and great for beginners.
What is new?
- We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
- The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
- Perfect compatibility with AzureFilm and Bambu Lab spools.
Printing recommendations:
- Print at 200–230°C temperature for best results.*
- You do not need a heated bed however, we recommend preheating your printing table to 50–60°C.
- Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.
*Ideal temperature may vary when using different printers.
Our Refill PLA filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.
AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.
By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.
Features and properties
Feature | Value |
---|---|
Flexibility | Low |
Strength | Medium |
Durability | Medium |
Difficulty to use | Low |
Shrinkage / Warping | Minimal |
Soluble | No |
Diameter available | 1.75mm |
Manufacturer | AzureFilm |
To know more about PLA filaments, read our blog.
You can access the Technical Data Sheet here.